STEEL BAR / REBAR MALAYSIA

STEEL BAR / REBAR MALAYSIA

STEEL BAR MALAYSIA    REBAR MALAYSIA

WHAT IS STEEL BAR ?  STEEL BAR MANUFACTURER  IN MALAYSIA ?  STEEL BAR PRICE ?                         HOW CAN BUY STEEL BAR ? BEST PRICE STEEL IN MALAYSIA? STEEL BAR

 

WHAT IS STEEL BAR

Rebar (short for reinforcing bar), known when massed as reinforcing steel or reinforcement steel,is a steel bar or mesh of steel wires used as a tension device in reinforced concrete and reinforced masonry structures to strengthen and aid the concrete under tension. Concrete is strong under compression, but has weak tensile strength. Rebar significantly increases the tensile strength of the structure. Rebar’s surface is often “deformed” with ribs, lugs or indentations to promote a better bond with the concrete and reduce the risk of slippage.

The most common type of rebar is carbon steel, typically consisting of hot-rolled round bars with deformation patterns. Other readily available types include stainless steel, and composite bars made of glass fiber, carbon fiber, or basalt fiber. The steel reinforcing bars may also be coated in an epoxy resin designed to resist the effects of corrosion mostly in saltwater environments, but also land based constructions. Bamboo has been shown to be a viable alternative to reinforcing steel in concrete construction. These alternate types tend to be more expensive or may have lesser mechanical properties and are thus more often used in specialty construction where their physical characteristics fulfill a specific performance requirement that carbon steel does not provide. Steel and concrete have similar coefficients of thermal expansion,so a concrete structural member reinforced with steel will experience minimal differential stress as the temperature changes.

steel bar supplier malaysia

steel bar supplier kuantan

STEEL BAR  (REBAR)  MALAYSIA

STEEL BAR REBAR IN MALAYSIA HAVE 10 MANUFACTURER

  • ALLIANCE STEEL SDN BHD (3.5 Mmt per annum) base in Kuantan Pahang Malaysia
  • Eastern steel sdn bhd base in kemaman kuala Terengganu
  • Malauysia steel works (kl) bhd base in Selangor
  • Amsteel mills sdn bhd base in sealangor
  • Ann Joo Steel Berhad base in penang
  • Southern Steel Berhad base in penang
  • Established Metal Industries Sdn Bhd base in selangor
  • Megasteel Sdn. Bhd selangor
  • Antara Steel Mills Sdn Bhd base in johor
  • King Hong Steel Sdn. Bhd base in Sarawak

In Malaysia total 10 steel bar manufactuer have sirim certicate comes with cidb approcal. Most of the contract will buy steel bar in Malaysia through the steel bar distributor.

STEEL BAR PRICE

STEEL BAR MARKET PRICE  IN MALAYSIA ARE HIGHLY DEPENDS  ON  THE MAIN FEW MANUFACTURE AS THEIR PRODUCTION IS DIRECTLY AFFECTED THE SUPPLY AND DEMAND OF THE REBAR MARKET.

 

 

 

 

HOW I BUY STEEL BAR

HOW I CAN BUY STEEL BAR IN MALAYSIA. IN MALAYSIA STEEL BAR ARE NORMALLY PRODUCE NY STEEL MANUFACTURER AND DISTRIBUTE TO THE MAIN STOCKING OR MAIN DISTRIBUTOR, LATER ON WILL DISTRIBUTE TO SMALLER SCALE HARDWARE SHOP.

IF YOU NEED STEEL BAR OR ANY OTHER STEEL PRODUCTS IN A CHEAP PRICE AND EXSTOCK, YOU ARE WELCOME TO ENRICH MULTITRADE SDN BHD http://www.enrichmultitrade.com/

ENRICH MULTITRADE SDN BHD HAS A 50 YEARS EXPERIENCE IN THE STEEL INDUSTRY. AS THE EXPERIENCE AND NETWORKING IN MALAYSIA , WE CAN ALWAYS POVIDE OUR CUSTOMER THE BEST COMPETITIVE PRICE AND THE FAST DELIVERY TO OUR CUSTOMER ON TIME.

ENRICH MULTITRADE ARE BASE IN KUANTAN PAHANG . WE DO SUPPLY TO KUANTAN, KEMAMAN, KERTEH, DUNGUN, KUALA TERENGGANU, SELANGOR, KLANG, MALACCA (Melaka), SEREMBAN, PUTRAJAYA, JOHOR, IPOH, PERAK, PENANG, KULIM, KUCHING.

Share this post

Comment (1)

  • Emirol azizie Reply

    I need quotation how much rebar per tan..
    i have a project to run after lockdown

    Total rebar 55ton

    Tuesday March 31st, 2020 at 08:39 AM

Leave a Reply

Your email address will not be published. Required fields are marked *


ENQUIRY







    X
    ENQUIRY